Construction Materials Testing

Overview

JEICL provides comprehensive construction materials testing for civil works, infrastructure projects and building proof consulting. Our scope covers Portland cement (OPC, PPC, PSC), Portland cement clinker, concrete cubes & cylinders, aggregates, bricks, blocks, AAC panels, reinforcement steel and soil investigation per IS codes.

Request Quote

Typical Turnaround

Standard samples: 3–7 working days. Urgent / rush testing: 24–48 hours on request, subject to parameter scope.

Reporting

Results issued on an ISO/IEC 17025:2017-aligned test report format with methodology references, measurement uncertainty where applicable, and digital signature of the Technical Manager.

Parameters Offered

Test parameters under this discipline

Indicative list — additional parameters are added regularly. Contact us if the parameter you need is not listed below.

Cement: Fineness (Blaine / Sieve)

Cement: Normal Consistency

Cement: Setting Time (Initial & Final)

Cement: Compressive Strength (3, 7, 28 days)

Cement: Soundness (Le Chatelier & Autoclave)

Concrete: Compressive Strength (cube, cylinder)

Concrete: Flexural Strength

Concrete: Split Tensile Strength

Concrete: Water Absorption

Concrete: Density

Fresh Concrete: Slump & Compaction Factor

Aggregate: Sieve Analysis (Gradation)

Aggregate: Specific Gravity & Water Absorption

Aggregate: Impact Value / Crushing Value

Aggregate: Los Angeles Abrasion

Bricks: Compressive Strength, Water Absorption, Efflorescence, Dimensions

AAC Blocks: Density, Strength, Drying Shrinkage (IS 2185 Pt. 3)

Steel: Tensile, Yield, Elongation, Bend Test (IS 1608)

Soil: Atterberg Limits, Proctor, CBR, Shear Strength

Methodology & Standards

Test methods traceable to recognised standards

IS 269:2015Ordinary Portland Cement (OPC 33/43/53)

IS 1489 (Part 1)Portland Pozzolana Cement (Fly Ash)

IS 16353:2015Portland Cement Clinker

IS 516Methods of Test for Concrete

IS 383Coarse & Fine Aggregates Specification

IS 2185 Part 3AAC Concrete Blocks

IS 1077 / IS 3495Common Burnt Clay Bricks

IS 1608 / IS 1786Steel Reinforcement Testing

IS 2720 (Parts)Methods of Test for Soils

IS 1893 / IS 2131SPT & Geotechnical Investigation

Instrumentation

Equipment used in this discipline

All instruments are maintained on documented calibration and preventive maintenance schedules, with intermediate checks logged against reference standards to ensure reliability between calibrations.

Compression Testing Machine (CTM, 2000 kN)
Cement Testing Complete Setup (Vicat, Le Chatelier, Blaine)
Concrete Cube & Cylinder Moulds
Slump Cone & Compaction Factor Apparatus
Sieve Shaker with IS-spec Sieves
Aggregate Impact & Crushing Value Apparatus
Los Angeles Abrasion Machine
Universal Testing Machine (UTM)
Atterberg Limits & Proctor Apparatus
CBR Testing Assembly

Construction Materials Testing